facebook
Helping Hands Cleaning Services
Helping Hands Cleaning Services

Simple Guide on How to Strip and Wax Floors and Why It Matters

Closet Storage Ideas | Helping Hands Cleaning Services

Floors take daily abuse as people walk all over them. Offices and facilities have much more traffic and require additional upkeep and care. Unfortunately, neglected floors can end up in a state that’s beyond repair. Keep in mind that the cost of replacing a floor is far more costly than it is to maintain one.

Even with the daily cleaning of floors, some will still experience damage and begin to look worn. The top of the floors is usually covered with a finish to protect against wear and damage. Over time due to foot traffic, the finish will begin to accumulate dirt and other scratches. When this happens, daily procedures are no longer enough to restore the shine of your floor. This is when stripping and waxing floors come in. This article will explain why stripping and waxing the floor are important. It will also provide you with a guide on how to strip and wax floors.

Simple Guide on How to Strip and Wax Floors and Why It Matters

With stripping and waxing, your floors will have a finish with your desired luster. This will give your facility a feeling of cleanliness. Apart from the shine, stripping and waxing will remove dirt and grime that the floor collects. It creates a barrier between the floor and anything that can damage it. Moreover, this protective layer can help reduce damage and warping which is usually caused by moisture and water damage.

What makes stripping and waxing beneficial is its aid in improving floor maintenance. The coating left after waxing the floor provides protection from wear or scratches. This is due to the polymers in the finish. It creates an invisible layer on the surface of the floor. This provides a lubricant between two objects rubbing together against the floor. Over time, it will improve the endurance of the floor’s finish. Especially if your facility is in a high-traffic area.

So, how often should you strip and wax the floor of your facility? It usually depends on the level of wear on it. But experts recommend that you strip and wax your floor once or twice per year. Do the floors in your facility receive a high amount of foot traffic? Are they often subject to heavy wear-and-tear? You might want to consider a regular stripping and waxing schedule.

In general, strip and wax floors are usually done yearly or every six to twelve months. This will help make sure that the floor in your facility stays looking its best.

Keep in mind that your floors are the first thing people notice when entering your facility. It is crucial to begin any cleaning procedure with the proper tools. For stripping, you will need the following:

  • Mop
  • Bucket
  • Wringer
  • Putty Knife
  • Sealed Back Mat
  • Dust Mop with Handle and Frame
  • Black Stripping Pad for buffer
  • Blue or Green Pad for auto scrubber
  • Disposable Mop
  • Floor Stripper Concentrate
  • Wet Vacuum
  • Swing Machine or Auto Scrubber with an extension cord
  • Wet Floor Signs

Make sure to begin your cleaning procedure by putting on the needed protective gear. Don’t forget to place wet floor signs outside of the area. This way, the guests will know that there is a cleaning in progress. This could prevent them from entering a hazardous area.

Here’s how you can start the strip and wax floors:

● Don’t forget to remove floor mats or objects from the area

You can start your cleaning by sweeping and removing all large debris from the area. You should make sure to vacuum and roll up any floor mats as well.

● Make sure to protect adjoining areas from stripping solution

You can place a carpeted, sealed-back mat outside of the area you’re planning to clean. The mat will collect any excess liquid or soil from the cleaners’ shoes. It will also reduce the risk of tracking out of the area and throughout the facility.

● Make sure to dust mop the area you’re planning to strip

Don’t forget to prepare dust mop procedures. After the dust mop, you can use a putty knife to remove any substances stuck to the floor. You should make sure that there isn’t any debris left behind.

● Do a proper preparation of stripping solution

Keep in mind that some stripping solutions are not ready-to-use. So, you will need to dilute them first. You should always prepare the stripper solution according to the manufacturer’s guidelines. Keep in mind that proper dilution is vital to the product’s performance. Remember that an over-concentrated chemical will not work faster or better. Under concentrated solutions might not be effective as well. Make sure you check the product label for instructions.

● Strip the floors

Don’t forget to wear a mask during the stripping process. This is to avoid inhaling the fumes. You should also wear gloves so you can protect your hands.

To start the process, apply the wax stripper to a three-foot area of flooring at a time. You can begin at the back of the room to avoid boxing yourself into a corner. Then, use your vacuum to remove the stripper and the floor wax. Make sure you follow the floor wax instructions.

You can repeat this process for stubborn areas. You can also opt to use steel wool to get the remaining wax off of the spot. Then, wet mop the area to get rid of all the wax strippers. After that, dry mop the area to pick up any remaining dirt or dust.

● Ventilate and dry

Make sure to open the windows and doors in the area for ventilation. Don’t forget to leave the window screen closed. This is to prevent debris from blowing into the area and landing on the floors. The drying process usually takes around 30 minutes. But it might also take longer in parts with high humidity. You can also use large fans to help speed up the drying process. Make sure not to point them over or at the floors.

● Apply the floor wax

Once the floor is dry, it’s time for you to apply the floor wax. Make sure that you follow the manufacturer’s instructions listed on your floor wax. You can use a microfiber cloth and a putty knife to smooth out the wax on the floor. Apply the wax in three-foot areas.

It is important to have your house cleaned, especially if you’re too busy to do it. You can hire expert cleaners for commercial cleaning from Helping Hands Cleaning Services. We can do the cleaning of your house for you without any problem. We also offer office cleaning and commercial cleaning services. We can do move-in, move-out cleaning, and Covid-19 coronavirus sanitizing too. For inquiries, you can call us at (630) 530-1324 or you can reach us through this line here.

More Helpful Articles

How to Clean Wood Paneling and Make It Beautiful Again

How to Clean Wood Paneling and Make It Beautiful Again

Wood paneling has received a bad rap for decades. Its fall from design grace was surprising as it was such a staple during the 1960s and 1970s. It was so popular that almost every home had a paneled living room or basement. That could have played a part. Wood rot and...

How to Clean a Humidifier Without Any Fuss or Mess

How to Clean a Humidifier Without Any Fuss or Mess

A humidifier is a great investment if you live somewhere that’s cold and dry. It can enhance the air quality inside your house. It also helps prevent the usual ailments that come with cold weather. You also won’t have to worry about dry skin and chapped lips. This...

How to Clean and Maintain Your Books So It Lasts Forever

How to Clean and Maintain Your Books So It Lasts Forever

Stephen King mentioned in his memoir that “books are portable magic.” A lot of book lovers will agree. After all, there’s nothing quite like finding a good title and immersing yourself in its pages. That magic can disappear though if you’re not careful. Books do...