Need a quick and easy method to keep your bathroom clean and dust-free? The solution is to clean your exhaust fan with light regularly. It aids in maintaining appropriate airflow in your house for increased comfort and air quality. Exhaust fans are beneficial for eliminating smells, dampness, and other air pollutants.
Cleaning an exhaust fan once every six months is required since this time allows undesired mold and mildew to accumulate. It is time to clean if you see excessive dust accumulation or mold on an exhaust fan with light. Whether you get help from housekeeping services in Wheaton, IL or do it yourself, knowing how to do this can prove to be very useful.
This article will teach you how to clean your bathroom exhaust fan with light. Let’s get started.
Step 1: Gather Cleaning Supplies
You will need the following cleaning supplies to clean your exhaust fan with light.
- Vacuum cleaner or duster to remove dirt, dust, and cobwebs from the fan blades and light cover.
- In order to clean the blades and light cover, you need a soft cloth.
- All-purpose cleaner or mild detergent to get rid of difficult stains.
- For scrubbing the stains you need a brush.
- Goggles for safety to keep your eyes safe.
- Gloves to keep one’s hands clean.
- You can use a bucket of warm water and an all-purpose cleaner.
- You need an old toothbrush to remove filth and grime from hard-to-reach locations.
Step 2: Remove the Cover
It is now time to remove the plastic cover that covers the exhaust fan and light. It’s incredibly simple; there’s no screw to tighten it. To open it, you’ll need a slotted or flathead screwdriver. So, cautiously use the stepladder to reach the exhaust fan, then enter the screwdriver into the center of the casing, cover, and push it up. Do this on all four sides of the cover. Otherwise, the cover will damage.
The cover is readily removed from the shell. Make sure to keep your hand beneath the cover so it doesn’t fall to the floor and break. You can also hire Helping Hands cleaning services in Bensenville, IL, to do this task for you.
Step 3: Remove the Light
Before you begin working, disconnect the exhaust fan. To be completely safe, turn off the main electrical power line. There are several types of exhaust fans that are presently utilized in bathrooms. Light bulbs are included in some of them. If your one does not have a built-in light, skip this step.
The method for removing the bulb varies depending on the kind of bulb. Many different types of light bulbs can be fitted there. So, first, identify the light kind and detach it. When finished, carefully set the bulb aside and move on to the next step.
Step 4: Remove the Fan
Shift your focus to the fan. Using a screwdriver, pull it out from the fixings. Remove the screws that hold the fan’s outer case to the ceiling joists or wall studs carefully. After removing all of the screws, gently remove the fan unit from its mountings to begin disassembly.
Remove the wire harness that connects to the electrical supply line to completely separate them. To avoid the fan from dropping, constantly hold it with one hand. If your fan isn’t disconnecting, clean it as it is.
Step 5: Clean Your Exhaust Fan Cover
Begin cleaning from the cover when your exhaust fan removes the plastic cover. Use the brush attachment to vacuum the cover, or dust it using a microfiber cloth and wipe it off with a soft, moist towel. A deep cleaning routine can also be done if you have a vacuum cleaner.
In addition, you can always use a surface cleaner as it yields positive results for this particular task. After that, clean the plastic cover with a moist cloth to give it a bright and immaculate appearance. When you’re finished, set the cover aside and move on to the subsequent stage.
Step 6: Clean the Fan
If you cannot remove the fan, use the brush attachment on your vacuum to retrieve any dust gathered on and around the unit. If you need to get into tight spots, use your vacuum’s crevice tool attachment. However, it is essential to be cautious. Otherwise, you could dislodge cables or harm other microscopic pieces. Instead of a vacuum, you may use a paintbrush or a microfiber cloth.
If you can remove the fan, clean the housing with the same equipment (brush and crevice attachment or microfiber cloth and paintbrush), eliminating as much built-up dust and debris as you can from the surfaces and edges, as well as at the ducting entryway.
Step 7: Use a Cleaner
Wipe off all exposed surfaces of the fan blades and exhaust cover with a soft cloth wet with warm water and a tiny bit of mild cleaner. Dust can gather in difficult-to-reach locations, so get into every nook and corner.
Then, using warm water and a clean towel, rinse away any leftover soap residue until all surfaces of both parts are clear of pollutants or mold. Finally, reattach all the components. You should also take a picture of the exhaust before opening it to avoid confusion.
Get a hand from housekeeping services in Wheaton, IL
Helping Hands house cleaning services in Bensenville, IL, have skilled professional cleaners who can do all kinds of cleaning tasks. Our cleaners will clean your bathroom exhaust fan with light in the right manner. You’re free to spend this time however you like, whether that includes going to the Grand Theater or getting some rest. You can be sure that your home is in competent hands in the meantime.
We can help with all kinds of tasks around your home, including helping you maintain leather clothing, sanitizing the hole in the toilet bowl bottom and fully disinfecting your home with vinegar. You can also check out our other interesting services, including move-in and move-out, house, and commercial cleaning. For more information, check out the FAQs.
Book an appointment by clicking here OR contacting us at (630) 530-1324.